qsk60 generator

QSK60 for High Horsepower Commercial Industrial

Frequency (Hz) 60, 50
Certification N/A

Select an Application


This Cummins® gas generator set is a fully integrated power generation system utilizing state of the art technology that results in optimum performance and efficient use of fuel for Standby applications.

Design: 4 cycle, V-block, turbo charged low temperature and after-cooled

Bore: 159 mm (6.25 in.)

Stroke: 190 mm (7.48 in.)

Displacement :60.3 L (3685 in.3)

Cylinder block: Cast iron, V16

Battery charging alternator: None

Starting voltage: 24 volts, negative ground

Fuel system: Lean burn

Ignition system: Individual coil on plug

Air cleaner type: Dry replaceable element

Lube oil filter type(s): Full flow and bypass filters Breather Breather filter 

Generator Model Hz Spec Sheet
C1000 N6 60 S-1623
C1000 N6C 60 S-1552
C1160 N5C 50 S-1466
C1200 N5C 50 S-1552
C1250 N6 60 S-1623
C1350 N6 60 S-1623
C1400 N5C 50 S-1552
C1400 N6C 60 S-1466
C1500 D6 60 SS16-CPGK
C2000 D5e 50 SS17-CPGK

Exhaust emissions - Lean burn technology provides exhaust emissions levels as low as 1 g/hp-hr NOx.

Cummins heavy-duty engine - Rugged 4-cycle lean burn gas combustion engine utilizing full authority electronic engine management and monitoring.

Permanent Magnet Generator (PMG) - Excitation system offers enhanced motor starting and fault clearing short circuit capability.

Alternator - Several alternator sizes offer selectable voltage and temperature rise with low  reactance 2/3 pitch windings; low waveform distortion with non-linear loads, fault clearing short circuit capability, bearing and stator RTDs, anti-condensation heater, class F or H insulation (see alternator datasheet for details). Mechanically strengthened for use on utility paralleling with unreliable grid. 

Control system - The PowerCommand 3.3® generator set control is standard equipment and provides total genset system integration including full paralleling capability in grid or load share mode, precise frequency and voltage regulation, alarm and status message display, AmpSentry™ protection, output metering, autoshutdown at fault detection and a user interface panel installed onto the genset. Optional remote operator panels are also available.

Cooling system - The generator set is equipped with the capability to interface with a remote radiator or heat exchanger.

Warranty and service - Backed by a comprehensive warranty and worldwide distributor network that can provide all levels of service from replacement parts to performance guarantee programs.

To access our complete brochure library, click here.
Redirecting to

The information you are looking for is on

We are launching that site for you now.

Thank you.