c17560 d5e generator

QSK60 for Data Center Continuous (DCC) Rating

Frequency (Hz) 50, 60
Certification N/A

Overview:

Cummins® commercial generator sets are fully integrated power generation systems providing optimum performance, reliability and versatility for data center applications.

Design: 4 cycle, V-black, turbocharged and low temperature after-cooled

Bore: 158.8 mm (6.25 in)

Stroke: 190.0 mm (7.48 in)

Displacement: 60.2 L (3673 in3)

Cylinder block: Cast iron, 60° V 16 cylinder

Battery capacity: 2200 amps at ambient temperature 0 °F to 32 °F (-18 °C to 0 °C)

Battery charging alternator: 40 amps

Starting voltage: 24 volts, negative ground

Fuel system: Direct injection

Fuel filter: Triple element, spin on fuel filters with water separator

Air cleaner type: Dry replaceable element

Lube oil filter type(s): Four spin-on, combination full flow and bypass filters

Standard cooling system: 104 ºF (40 ºC) ambient radiator

Generator Model Hz Data Center Continuous kVA / kW Spec Sheet
C1760 D5e 50 1600 / 1280 SS17-CPGK-DC50
DQKAH 50 1825 / 1460 S-1645DC
C2000 D5e 50 1825 / 1460 SS17-CPGK-DC50
C2000 D5 50 1875 / 1500 SS17-CPGK-DC50
DQKAG 50 2000 / 1600 S-1645DC
DQKAD 60 2000 / 1600 S-1627DC
C2250 D5 50 2000 / 1600 SS17-CPGK-DC50
C2500 D5A 50 2250 / 1800 SS17-CPGK-DC50
DQKAJ 50 2250 / 1800 S-1645DC
C2000 D6 60 2281 / 1825 SS17-CPGK-DC60
DQKAE 60 2281 / 1825 S-1627DC
C2250 D6A 60 2500 / 2000 SS17-CPGK-DC60
DQKAF 60 2500 / 2000 S-1627DC
DQKAN 60 2813 / 2250

Data Center Continuous (DCC) - Applicable for supplying power continuously to a constant or varying electrical load for unlimited hours in a data center application.

Uptime Compliant - Meets the requirement of a Tier III and IV data center site by being rated to run for unlimited hours of operation when loaded to 'N' demand for the engine generator set.

Cummins heavy-duty engine - Rugged 4- cycle, industrial diesel delivers reliable power, low emissions and fast response to load changes.

Alternator - Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings, low waveform distortion with non-linear loads and fault clearing short-circuit capability.

Permanent Magnet Generator (PMG) - Offers enhanced motor starting and fault clearing short circuit capability.

Control system - The PowerCommand® digital control is standard equipment and provides total genset system integration including automatic remote starting/stopping,precise frequency and voltage regulation, alarm and status message display, AmpSentryTM protective relay, output metering and auto-shutdown at fault detection and NFPA 110 Level 1 compliance.

Cooling system - Standard and enhanced integral set-mounted radiator systems, designed and tested for rated ambient temperatures, simplifies facility design requirements for rejected heat.

NFPA - The genset accepts full rated load in a single step in accordance with NFPA 110 for Level 1 systems.

Warranty and service - Backed by a comprehensive warranty and worldwide distributor network.



To access our complete brochure library, click here.
Redirecting to
cummins.com

The information you are looking for is on
cummins.com

We are launching that site for you now.

Thank you.